LOCATION: > HOME > Fire Safety Information > Caring for Cut Christmas Trees

Caring for Cut Christmas Trees

Caring for Cut Christmas Trees

The following tips are offered by the Christmas Tree Farmers of Ontario

1. If you buy a tree several days before you plan to set it up, store the tree outdoors or on a cool porch or patio until you are ready to decorate it. An area that provides protection from the wind and sun will help the tree retain its moisture.

2. If you plan to store the tree for several days, make a straight cut across the butt end of the tree about one inch from the end. This opens the tree stem so it can take up water. Store the tree upright and place the butt end in a container of water.

3. When you bring the tree into the house for decorating, make another fresh cut across the trunk about an inch from the original cut. Use a tree stand that holds plenty of water.

4. Trees are thirsty. They may drink up to four litres of water per day, so be sure to check daily and supply fresh water as needed. A stand which holds at least four litres of water is recommended. If you allow the water level to drop below the bottom of the tree, a seal will form just as it does on a cut flower and a new cut will be necessary.

5. Place your tree away from fireplaces, radiators, television sets and other sources of heat. Turn off the tree lights when you leave and before you retire at night.

6. Avoid the use of combustible decorations. Check all electric lights and connections. Do not use lights with worn or frayed cords and NEVER use lighted candles on a Christmas tree.